Poynting Conduit


Poynting Commercial Antennas are state of Art passive coverage enhancement solutions for 2G/3G/LTE networks with very high data speed enhancement for LTE networks using MIMO.

As 4G networks are being rolled it is very difficult for the Service provider to achieve good coverage and hence high speed everywhere. On the other hand the marketing strategies are promoting LTE launches which brings to an operator a serious issue of how to provide good coverage, high speed in a short time with lowest cost.

One solution is to provision repeaters and boosters but doing at every customer site does not justifies the cost per user and can only be done for enterprises who are giving a high cumulative revenue to the operator.

Poynting Antennas are high gain LTE MIMO Antennas with desktop modems, window mount and outdoor wall mounted providing a gain of 2 dB to 18 Dbi and available in Omni and Directional.

The antennas are low cost passive devices which directly plugs in (with the adapters provided for the modem) into the CPE, LTE Modem or MiFi devices that have antenna port. This brings enhanced signal that too MIMO with stability to the devices thereby giving significant improvement in data speed.

There are various commercial model by which the Antennas are provided to the end users like:

1. For every premium customer when he complains about speed or the network is aware that there is no decent coverage at his place the operator can provide this Antenna complementary.

2. For non premium customer, they can be sold these antennas from the sales point or franchise when they purchase the MiFi or LTE modem or in case of complaints they can be asked to purchase the antenna separately.

3. For enterprises taking LTE Internet services from the Operator, they can provide a more robust permanently wall mounted solution.

4. Stock and Serve model provide by us ; whereby we will stock the antennas at our cost and whenever there is a customer complain our technicians will visit the customer and provision the antenna and then bill the operator on per installation.

The recommended Poynting Antenna Models

A-XPOL-0002-V2 Poynting

1) A-XPOL-0002-V2

The antenna provides an innovative and future-proof solution for 4G / 3G and 2G networks. It is a unique wall or pole-mountable, dual polarised, full LTE band antenna.

Incorporating two separately fed ultra wideband elements in a single housing, the antenna is equipped to provide client- side MiMo and diversity support for the networks of today and tomorrow.

The weatherproof housing is designed for window, mast and wall mounting. The antenna has 2 x 5 metres of low loss cable. This is a cost effective and value-added product for signal enhancement and ensuring higher throughputs and stable links for subscribers.

This will improve subscribers’ user experience and ensure client retention. It is ideal for any application using the GSM network (LTE/HSPA/3G/EDGE/GPRS). … click here for Specs

A-XPOL-0006 Poynting

2) A-XPOL-0006

The antenna provides an innovative and future proof solution for 2.3-2.4 GHz LTE deployments. It is a unique wall or pole mountable, dual polarised, 2.3-2.4 GHz LTE antenna with 11 dbi gain.

Incorporating two separately fed elements in a single housing, the antenna is equipped to provide client side MiMo and diversity support for the networks of today and tomorrow.

The weatherproof housing is designed for mast and wall mounting.

This is a cost effective value added product for signal enhancement and ensuring higher throughputs and stable links for subscribers.

Available in 1800 MHz band also very soon. … click here for Specs

A-LPDA-0092-V4 Poynting

3) A-LPDA-0092-V4

This high-gain wideband directional antenna covers all international cellular, mobile and wireless data bands including GSM 900/GSM1800/UMTS/LTE bands as well as extended cellular and WiMAX bands such as European/ USA “Digital Dividend bands” and 2.3-2.7GHz licensed and unlicensed data bands providing a gain of 12 dbi.

Its configuration is suitable for various wireless communications systems.

This antenna is unique in its combination of ultra wide-band operator with a consistent high-gain performance.

For MiMo two antennas can be mounted.

It has been successfully used in extreme weather environments in Africa and Europe with close to zero failures.

A firm favorite, in any area where operators are having signal challenges.… click here for Specs

A-IMOD Poynting

4) A-IMOD (LTE Modem with integrated outdoor antenna)

The iMod is both a modem and an antenna.

Taking the electronics of a modem and adding our renowned omni-directional antenna expertise PLUS making it a robust outdoor fixture, makes for the next generation dongle;

One that receives and boosts signal at the same time.

This integrated solution provides internet connectivity over the USB cable connected to the unit or via the indoor WiFi access point included in the package.

Can provide multiple users with internet access.

The iMod Omni-antenna requires no antenna alignment and has the ability to use all available base stations.… click here for Specs

A-OMNI-0039-05-V3 Poynting

5) A-OMNI-0039-05-V3

This is an aesthetically pleasing tri-band cellular antenna for general indoor and outdoor cellular applications.

The linear polarised antenna has a compact design and magnet mounting also making it suitable for mobile applications.

It is ideal for machine to machine (M2M) applications that are communicating through GSM network (GPRS/ EDGE/ 3G/ HSPA/ LTE).

This antenna exceeds the performance of a standard monopole for the following reasons:

It is ground-plane independent. It uses high quality low-loss cable.

It is a dipole not a monopole. This is the antenna of choice for Point-of-Sale (POS) terminals, ATM’s and most telemetry solutions.… click here for Specs

 A-OMNI-0069-V3 Poynting

5) A-OMNI-0069-V3

LTE operates on new frequency bands since current equipment still needs support on existing bands until all cellular equipment becomes 4G enabled, this antenna is ideal as this antenna is backward compatible with legacy cellular technologies.

4G / LTE is an exciting cellular technology that has potential peak data rates of 300 Mb/s and higher. This will cause a fundamental change in the role of wireless data for internet access.

This high gain omni-directional antenna covers all cellular frequencies bands needed for LTE(4G), but also covers the bands for HSDPA, 3G, EDGE, GPRS and voice. Its configuration makes it suitable for fixed installations of any cellular frequency band.

This is one of the few omni-directional antennas in the world that offers consistent high gain over a very wide frequency band. This makes it a very popular choice with installers because of its base station agile.… click here for Specs

 A-ADPT-026 Poynting

6) A-ADPT-026 (Universal Modem to Antenna Adaptor)

This device couples most data modems to an external antenna. The diverted antenna ensures better signal reception and ultimately better data throughput.

The coupler slides over the modem (see photos). You then connect the other end of the coupler to one of our booster antennas via the SMA (female) connector.

The booster antenna can be mounted on the outside of a building and pointed toward your closest cellular base station to ensure good reception.… click here for Specs